Grundfos UPS Series 100, UPER and SOLAR circulators must be disposed of according to local regulations by using a public or private waste collection service.
- Safety related to materials used
- Caution: Persons with pacemakers who disassemble this product shall exercise care when handling magnetic materials embedded in the rotor.
There is no risk to people during the disassembly process posed by the materials used in the product.
Disassembly of the Product
The main materials of the components are:
- Cast Iron
- Electronic components
- Composite materials
and can therefore be recycled to a large extent – depending on the national possibilities for recycling.
The pump is assembled by using screws and bolts and can be disassembled with standard tools. There are no loose parts inside the motor.
|Pos. no.||Designation||Material||Special disassembly considerations|
|1||Control box (UPS)||Composite|
|2||Control box (UPER)||Composite|
|Control electronics||PCB with SMD components|
|Control box cooling cover||Aluminium|
|5a||Stator||Copper wire||The stator is heat-shrink fitted into the stator housing|
|Stator lamination||Laminated Iron|
|9||Rotor can||Stainless steel|
|Radial bearing||Ceramics||The front-bearing is shrink fitted into the rotorcan|
|Air-venting/ de-blocking screw||Brass, nickelled, Ms58|
|11||Stop ring||PES 30 % GF|
|Rotor||Laminated iron with copper rods|
|Rotor cladding||Stainless steel|
|Thrust bearing retainer||EPDM rubber|
|13||Bearing plate||Stainless steel|
|16||Impeller||Composite/ PES 30 % GF||The impeller is shrink fitted onto the shaft|
|17||Neck ring||Stainless steel|
|18||Pump housing||Cast iron|