Grundfos MTS pumps must be disposed of according to local regulations by using a public or private waste collection service. If this is not possible, contact the nearest Grundfos company or service workshop.
Safety related to materials used
- There is no risk for people during the disassembly process posed by the materials used in the product.
- Be sure that the pump is clean and empty for liquid before disassembly.
Safety related to handling the product
- Care should be taken when handling the pump/components due to the weight.
Disassembly of the Product
The main materials of the components are:
- Cast iron
- Stainless steel
- FKM rubber
The MTS pump can therefore be recycled to a large extend – depending on the national possibilities for recycling. To disassemble an MTS pump, standard tools can be used.
|Designation||Name||Material||Special Disassembly Consideration|
|A||Pump cover||Cast iron|
|B||Discharge casing||Cast iron|
|C||Shaft seal|| Stainless steel (1.4571)|
Seal rings: Silicon carbide / Silicon carbide
|E||Rotor housing||Cast iron|
|F||Suction casing||Cast iron|
|Additional materials:||Screws, gaskets etc.: Various materials less than 5% of the weightScrews, gaskets etc.: Various materials less than 5% of the weight|